ACCRA FX 3.0 Shafts Will Fit Any Golfer Perfectly

By DanSueltz May 3rd, 2021

ACCRA FX Gen 1-2-3

Based upon or testing of the newest release, we know the ACCRA FX 3.0 shafts will fit any golfer perfectly! We have been using these shafts since their first generation and cannot find a better set of complementary shafts. Three distinct models of shafts for drivers, fairway woods and hybrids allow custom fitters to fit literally every golfer for the proper flex, launch and spin characteristics.

Take our FREE Fit Quiz to see which of these shafts will work for YOUR swing!

Models Available

Three distinct models based upon trajectory:

FX 3.0 100 Series - High Launch/Trajectory

FX 3.0 200 Series - Mid Launch/Trajectory

FX 3.0 300 Series - Low Launch/Trajectory

Driver Shafts

The ACCRA FX 3.0 driver shafts come in three distinct models:

FX 3.0 100 - 40, 50, 60 gram - High Launch/Trajectory

FX 3.0 200 - 50, 60, 70 gram - Mid Launch/Trajectory

FX 3.0 300 - 60, 70, 80 gram - Low Launch/Trajectory

Fairway Shafts

FX 3.0 100F - 65 gram

FX 3.0 200F - 75 gram

FX 3.0 300F - 85 gram

When we do our fittings, we recommend a slightly softer tip or higher trajectory for fairway woods than the driver. So if you are fitting to a FX 3.0 360 (65 gram) driver shaft, we would recommend a FX 3.0 200F (75 gram) for the fairway, as an example.

Hybrid Shafts

FX 3.0 100H - 60 and 75 grams

FX 3.0 200H - 85 grams

FX 3.0 300H - 95 grams

In our fitting recommendations, we usually recommend an 85 gram shaft for strong players, and 95 gram for the strongest players. Golfers with driver speeds 85 mph or under (180 - 220 yard drives) should stay with lighter 60 or 75 grams hybrid shafts.